Re: Starter for 64 Plymouth 383
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Starter for 64 Plymouth 383




Make sure it is for a '95 and back Magnum motor...Magnums started in '92 or  
so.  May be more applications dating further back, but '96 and up  have a 
different connection and you would need to get a little jumper  harness for, that 
used to be available from Chrysler.  I think that my  facts are correct about 
the jumper harness since its been quite a while since I  have had to use 
one...we hardly see the 90's trucks at my dealership  anymore.  I used a starter 
for my '95 Dakota on my '64  Fury.      
Rick Rice



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.