RE: 63 Polara Hesitation?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 63 Polara Hesitation?



The rubber seal for the acc. pump might be drying out
and cracking a bit allowing air to enter.Thus,the
hesitation.
--- Rich Kinsley <rlkinsley@xxxxxxxxx> wrote:

> 
> 
> Brian Schlump wrote:
> > 
> > Jim,
> > As others have mentioned, the hesitation may be
> due to a problem with 
> > the carb accelerator pump.  The first thing I
> would do is see whether it 
> > 
> > has a Carter or Edelbrock carb.  If so, see
> whether you can extend the 
> > accelerator pump stroke.  For maximum stroke, the
> linkage should be 
> > inserted into the hole that is closest to the
> accelerator pump.  
>
=====================================================================
> 
> You can check if the accelerator pump is working at
> all by taking the 
> air cleaner off and with the engine off just look
> inside as you pump the 
> throttle by hand. You should see some gas squirt
> into the carb. It might 
> need more if it is squirting but you at least know
> if it's functioning 
> at all. The pump can be replaced if bad and the
> amount can be changed by 
> the linkage changes.
> 
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.