2 more cents. I have paid less for complete 73-6 a body disc setups including usable rotors.? i hope the MC you have is a disc brake MC (the rear?reservoir is bigger than the front), but failing that you can get one from rock auto for 30 bucks rebuilt.? just get the manual brake MC for a 73 Satellite.? I converted my 69 charger and also my 63 fury and 67 satellite. -----Original Message----- From: Don H. <mopar4me@xxxxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxx Sent: Thu, 21 Feb 2008 8:22 pm Subject: Re: B-Body Brake Conversion Revisited I can't say for sure if those spindels are a direct fit or not. since there were no factory disc brakes on a B Body until 66 and they were IIRC a KH 4 piston set up They look like the 73-76 A Body spindels. I'd quiery the seller and find out for sure. I did the A Body 73-76 disc swap on a 69 Charger and it worked great and still used my 14 in wheels. If they are the A Body spindels, I'd be willing to bet you could find them a lot less expensive elsewhere. Of course you still have to buy all the rest of the stuff you mentioned. Just my 2c.? Don? ----- Original Message ----- From: "Bill" <Y1TopBanana73@xxxxxxxxx>? To: <1962to1965mopars@xxxxxxxxxx>? Sent: Thursday, February 21, 2008 12:35 PM? Subject: B-Body Brake Conversion Revisited? ? >? > OK...I want to double check what's left of the info in my brain before I? > make a purchase.? >? > I want to convert my 65 Coronet w/ 4 wheel drums to front manual disc? > for the upcoming driving season. I already have a MC from a 70 coronet? > w/ man brakes.? >? > The way I see it, if I buy these disc brake spindles w/ caliper? > brackets...? > http://cgi.ebay.com/ebaymotors/1962-74-Mopar-B-E-body-spindles_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ34200QQihZ001QQitemZ110179282638QQrdZ1QQsspagenameZWD1V? >? >? > then all I need to get and install the rest of the parts (Proportioning? > valve, brake line to said valve, rotors, calipers, pads, bearings, etc),? > bleed them, and I'm good to go, correct? And the above spindles are a? > direct fit?? >? > And my next question is will this disc setup allow me to run my stock? > 14" wheels? or will need to goto 15's? Finally, are there several? > different sizes of disc's available or just one size. Sorry...all my? > knowledge intimate knowledge about parts interchange is w/ A-Bodies.? >? > Thanks in advance!? >? > Bill M? > 65 Coronet 500 'vert? >? >? > ----? > Please address private mail -- mail of interest to only one person -- > directly to that person. I.e., send parts/car transactions and > negotiations as well as other personal messages only to the intended > recipient, not to the Clubhouse public address. This practice will protect > your privacy, reduce the total volume of mail and fine tune the content > signal to Mopar topic. Thanks!? >? > '62 to '65 Mopar Clubhouse Discussion Guidelines:? > http://www.1962to1965mopar.ornocar.org/mletiq.html.? >? > ? ----? Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!? ? '62 to '65 Mopar Clubhouse Discussion Guidelines:? ? ________________________________________________________________________ More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.