RE: heater buttons stiff

[sean dietz <dietz_diggler@xxxxxxxxx>]

thanks daniel, i appreciate it. actually my defrost button broke 
yesterday morning (was freezing cold) i hope to get to fixing everything 
this weekend. I appreciate the direction.
Sean Dietz
Daniel McCormack wrote:
> 
> Sean, Go to the tech page on Gary's site:
> 
> http://www.1962to1965mopar.ornocar.com/techstuff.html
> 
> Scroll about 1/3 of the way down the page and click on Kevin Merkley's 
> article on heater operation and on the 2 part article on rebuilding the 
> heater switch and read what Don Vermillion wrote. That should help.
> 
> Dan
> 
> 
> ----- Original Message ----- 
> From: "sean dietz" <dietz_diggler@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, February 12, 2008 9:43 AM
> Subject: heater buttons stiff
> 
> 
> >
> > i took my dash out and removed the heater buttons for
> > easier access. (they worked fine) when i put
> > everything back in all went smoothly enough, till i
> > went to use my heater, now the buttons are real stiff,
> > to the point where sometimes you have to pull a little
> > on the one depressed to allow the other to go in
> > easier. i took it back out and didnt see anything that
> > stood out as unordinary. any ideas?
> > Sean Dietz
> 
> 



4dr 64 dodge 440 (daily driver),63 fury 2dr,65 belvedere II 2dr hardtop


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.