Hello, I have a 63 Sport Fury with the original Borg Warner T-10 4 speed. I have a couple of questions: I had the transmission disassembled and inspected before I put it back in the car, the shop installed new gaskets and seals and said it looked great inside and I should not have any problems. I do have a problem, it jumps out of second gear unless I keep power on. It is not a linkage adjustment problem. Is the transmission worth trying to get rebuilt? Am I able to replace it with an 833 and if so what will I need to change besides the driveshaft? If I change to an 833 can I still use the Hurst shifter? Thanks Dennis C. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.