RE: another radiator hose question

[Richard Kinsley <r.kinsley@xxxxxxxxxxxxxxxx>]

Lee Sumpter wrote:
> 
> I found a molded hose to fit the lower side of my 64 Plymouth 361.
> However after I installed it, I realized that it did not have the
> spring inside. The FSM says that the spring is necessary to prevent
> the hose from sucking shut at high speeds/rpms. Anyone on the list
> have any experience with this? Am I going to have problems with this,
> or should I find another hose with the spring?
> Thanks for your opinions.........
> 
> 
> -- 
> Lee Sumpter
=====================================================================

I pulled the spring out of my old hose and put it in the new one. It 
came out real easy.


Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.