I have Cooper radials on my 63's and run 30 psi.? Its a compromise between the 24-28 psi for the old bias plies and the 35 psi maximum on the sidewall. -----Original Message----- From: Kevin Merkley <krmerkley@xxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxx Sent: Tue, 23 Oct 2007 4:28 pm Subject: Tire Pressures Hi, What tire pressures do you folks run your radial tires? The owners manual of my 64 Dodge call for 26 and 28 psi (belted tires). Do we ignore the listed pressures and go with 35ish that is more normal on newer vehicles? I use 35 psi but never asked this question before. What do you think? K. Kevin R. Merkley Thunder Bay, Ontario 64 Dodge 440 2dr HT (Cdn) ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.