RE: valve guide seal-spring?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: valve guide seal-spring?



Gary, if you go to buy a c-clamp type get a good one...I bought a cheap 
Sears one and it's more trouble that it's worth. Can't get it to work 
straight, it keeps slipping sideways. 
Gary H. wrote:
> 
> No, the head is off the motor. 
> 
> I'd prefer a C clamp style tool, but all the loan-a-tool auto stores 
> around here only have the small puller-type shown in the picture I 
> posted earlier.  
> 
> Thanks,
> Gary H. 
> 
> george smith wrote:
> > 
> > Are you using compressed air in the cylinders to hold
> > the vave? I did seal replacement yrs. ago on a 77
> > cougar and the tool was different. It was a fairly
> > easy job. I'd check for a different tool. 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.