Re: Engine ID
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Engine ID



Thanks Bill.  Even my 2nd inquiry got lost.  It never came back to my mail
box!
----- Original Message ----- 
From: "Bill Watson" <wwatson6@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, September 25, 2007 8:44 PM
Subject: Fw: Engine ID


>
> I had sent this earlier, but it seems to have gotten lost out there
> somewhere.
>
>
>
> The casting date "10-7-76" negates the 1982 model year idea.   October 7,
> 1976 was well within the 1977 model year.  The "7' in the engine number is
> for the 1977 model year..
>
> The "T" is for the Trenton engine plant and "440" for the engine size.
>
> The "11" is part of the date code for the engine assembly  - there are two
> numbers missing.  The "302" means it was the 302nd engine built that day.
> Or if the numbers are laid out as "11 30 2", the engine was assembled on
> November 30, (1976), 2nd shift.
>
> Check the passenger side of the engine, just aboe the oil pan rail and
> behind the engine mount.  There should be eight numbers/letters stamped
into
> the block   Those eight digits are the last eight digits of the VIN for
the
> car / truck the engine was installed.
>
> Bill
> Vancouver, BC
>
>
> > ----- Original Message ----- 
> > From: "Leslie Thrasher" <redred1@xxxxxxxxxx>
> > To: <1962to1965mopars@xxxxxxxxxx>
> > Sent: Tuesday, September 18, 2007 11:41 AM
> > Subject: Engine ID
> >
> >
> > >
> > >
> > > I have a 4006630-440-4, 10-7-76 cast on block and 7T440
> > >   11   302 stamped on boss behind water pump.  I understand the block
> > casting number but the stamping has me puzzled.  Could it be an 82 model
> > motor home?  Anybody want to comment? Thanks
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.