RE: Below Intake Manifold

[george smith <bt6t4@xxxxxxxxx>]

Available at any Home Depot....
--- Tom Duross <tduross1@xxxxxxxxxxx> wrote:

> 
> That's what was under my 361's carb pad, regular
> foil faced building
> insulation.
> All scrunched up and packed in.
> Tom
> 
> It's basically a piece of fiberglass insulation
> wrapped in aluminum foil.
> --- Jimmy Peavy <peaver63@xxxxxxxxxxxxxx> wrote:
> 
> >
> > It isn't absolutely essential that it be replaced,
> > but if you feel you
> > need to, any insulation would work.
> > The styrofoam will work, but if you get any
> gasoline
> > on it, it's history.
> > There is a product that used to be made that was
> > called Armaflex.
> > Air conditioning companies use it, mostly on
> > refridgerant lines, but it
> > does come in sheets
> > It's black in color, and comes in 1/2" thickness.
> > Works well. Looks like neopreme rubber.
> > As small of a piece  that you need. you may find
> > someone that would give
> > it to you.
> >
> >    Jimmy
> >
> > Gary H. wrote:
> >
> > >There was a disintegrated mess of silver/fiber
> > insulation under the
> > >intake of a 383 that I pulled. Any suggestions as
> > to some modern
> > >material to replace that insulation with?
> > >
> > >Thanks,
> > >Gary H.
> > >
> > >
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 
> 
> 


George



       
____________________________________________________________________________________
Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.