The 4th digit on 1960-64 VIN plus American 1965 VIN, is for the assembly plant. Before 1966 there was no digit in the VIN for the engine size, only whether it was a 6 or V8 in the case of Plymouth, Dodge, Valiant, Dart, Coronet and Belvedere.. A "1" in the 4th spot means the car was built at Lynch Road, Detroit, while "2" is for Hamtramck. During the MasWedge era. (1962-64) Lynch Road built Plymouths and Hamtramck built Dodges. All MaxWedge cars were built at Lynch and Hamtramck. No where else. So, the"2" in the 4th digit of your Polara 500 means it was built at Hamtramck, Michigan (aka Dodge Main).. Bill Vancouver, BC ----- Original Message ----- From: "Robert (UK)" <r.lane@xxxxxxxxxx> To: <1962to1965mopars@xxxxxxxxxx> Sent: Sunday, August 26, 2007 5:33 PM Subject: RE: Max wedge VIN info > > > Dave does this only apply to 64's? > I was told our 63 originally had a 361 but it has a '2' as the 4th > digit.... > > Robert > 63 Polara 500 > England > > Dave Walters wrote: > > > Ron,the next time the car is there get the VIN from the tag on the door > > jamb and then have that number run through Darrell's '64 book.I can > > understand the fender tag being missing as some people will steal > > anything.In 99.9% of the cases,the VIN tag will tell the true story as > > all the Maxie cars can now be verified. > > > > The 4th digit of the VIN needs to be a "2".If it's not,don't waste your > > time. > > > > Dave Walters > > Denver, Co. > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.