Re: pitman arm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pitman arm




Thanks so much Jim
Butch
----- Original Message ----- From: "Jim Jablonski" <jim@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, August 03, 2007 7:38 AM
Subject: RE: pitman arm



Butch,

My '64 Plymouth service manual is showing the Steering Arm Nut torque
spec. as 120 foot pounds.

Regards,

Jim



Clear DayHi all, just put a  new steering box on my 64 Dodge 440, does
anyone know how tight to  put the nut on the pit man arm?  Certain lbs
of
torque? Thanks...........
        Butch




----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.