If I remember correctly,it's not so much the z bar itself,as the difference in the placement of the mounting points on the bellhousing itself.I have a later model BH on my 64 and I had the z bar modified before I knew about the mounting holes on different yrs. If I'm wrong,please correct me. --- Brian Schlump <jsbs@xxxxxxxxxxxxx> wrote: > > Does anyone know whether the z bar pivot that bolts > to the bellhousing > on a '66 big block (10.5" housing)is the same as the > one used on a '64 > big block (10.5" housing)? > Brian > > '64 Belvedere > Davenport, Iowa > > "The difference between ordinary and extraordinary > is that little > extra." > > > ---- > Please address private mail -- mail of interest to > only one person -- directly to that person. I.e., > send parts/car transactions and negotiations as well > as other personal messages only to the intended > recipient, not to the Clubhouse public address. This > practice will protect your privacy, reduce the total > volume of mail and fine tune the content signal to > Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > > > George ____________________________________________________________________________________ Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.