Robert, You'll get all the correct hangers and hardware you'll need from TTI, when you buy their complete exhaust system package that bolts up to the factory style exhaust manifolds...Brian Robert wrote: > > Jimmy > > We'll use the hangers we get with the TTi kit. > > What I was trying to say was I'm not too sure (until it arrives) how the > > TTI hangers will attach to where our existing (home-made?) system > attaches, as I dont know if ours uses non-standard mounting points or > hardware. I'll have a look next time I'm under there and compare it with > > the diagram on the TTI site > http://www.ttiexhaust.com/Exhaust-MW/Max%20Wedge.htm '64 Belvedere Davenport, Iowa "The difference between ordinary and extraordinary is that little extra." ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.