RE: Disc Conversion...just that easy?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Disc Conversion...just that easy?



I agree with George...I used 75 Dart spindles, calipers, and rotors on 
my 64 Polara with the original control arms. Used a Jegs prop. valve for 
$35, too.
george smith wrote:
> 
> I went w/ Rick E from Mopar Action yrs. ago. I used
> Volare spindles.Cordoba pin calipers,etc. No need to
> change control arms.I used my originals.
> --- Bill <Y1TopBanana73@xxxxxxxxx> wrote:
> 
> > According to Moparts.com (
> > http://www.moparts.com/Tech/tech/pages/b-ebody.html
> > ) all you have to
> > do suspension wise to convert a 62-65 B-Body from
> > drum to discs is
> > change the spindle to a later disc B-Body, then do
> > the master
> > cylinder, proportioning valve, etc. You don't need
> > to change any
> > control arms. Is this correct?
> > 
> > Bill M
> > 65 Coronet 500 'vert
> > 
> 
> 
> George
> 
> 
> 
>  
> ____________________________________________________________________________________
> 
> Expecting? Get great news right away with email Auto-Check. 
> Try the Yahoo! Mail Beta.
> http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.