On 21 06/27/07, Paul Hamaday wrote: > I did this years ago but forget the details. What > parts are necessary to put the 73-76 A body front disc > brakes on a 71 A body? not totally off-topic because it works for 62-65 B/A bodies too. http://www.moparaction.com/Tech/archive/disc-main.html only thing I'd add is that F-body spindles do in fact work, although e-berg sez don't use 'em. also, you can mount them backwards (swap left to right) to make room for factory 65-72 swap bars and some of the aftermarket sway bars. if you do swap left to right, brake flex line selection and routing requires extra care. i've had good luck at the parts counter specing 1976 Dart calipers and 1976 Aspen brake lines (i've done this on a 69 Dart, a 63 Dodge, and a 66 Coronet). I've never heard of anyone expressing disappointment with this swap and thats after 13-14 years on various mopar mailinglists. The $800-1200 kits, however, don't do any better than this, and in some cases, have disappointed buyers with use of spacers and shims to make GM parts fit. some additional reading: http://www.autohobbydigest.com/a-brake.html ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.