The problem lies in the body style the rear seat was built for, and not make or series. The square corner seat is for a 2-door sedan or hardtop, while the rounded corner seat bottom is for a 4-door. Rounding the corners permitted more room for the legs and feet to enter and leave the car through the rear door opening.. So, if you want to use the Legendary interiors, get a seat bottom from a 2-door sedan or hardtop. Should not matter if the seat is from a 330, 440, Polara, Savoy, Belvedere or Firy. The Canadian 1964 Dodge 440, by the way, used the Belvedere interior. The Polara used the Fury interior. In 1963, though, the 440 used the Fury interior as the bottom Canadian Dodge series was the 220 (Savoy) and the middle series was the 330 (Belvedere). No Canadian Polara in 1963, and no Sport Fury or Polara 500, although you could get the Sport Fury seats in the Fury or 440 (Polara in 1964) hardtop or convertible models. Bill Vancouver, BC ----- Original Message ----- From: "don carson" <doncarsondodge@xxxxxxxxx> To: <1962to1965mopars@xxxxxxxxxx> Sent: Sunday, June 24, 2007 7:57 PM Subject: Need '64 Fury rear seat bottom, Help! > > Hi Gang! > Anybody have a good '64 Fury (not Sport Fury) rear > seat bottom cushion to part with. > > I'm building my 64 Dodge 330 (originally 440 model > and changing the interior from Anniversary gold to red > and since no one makes Dodge 330 upholstery and since > I saw an article in Mopar collectors guide last year > showing a Canadian Dodge 440 with Fury seat covers > (Canadian Dodges had Plymouth interiors and > vise-versa) I ordered a set of 64 Fury seat covers > from Legendary Interiors. > > I matched up the fronts and they are the same so I > started on the back seat and OOPS! the rear seat > bottom cushion on the Dodge has rounded corners on the > front sides and the Legendary Plymouth Fury corners > are squared off. Everything else fits except the rear > bottom cushion. I have an excellent Dodge 440 bottom > seat but it will not work. If anybody has a 64 Fury > rear bottom seat I need it to finish my car. > Please email me. > Thanks! > Don Carson (almost finished 64 Dodge 330 MW clone) > > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.