moving oil filter..Don D. where are you !

[Bob Fortson <bobt1885@xxxxxxxxx>]

No responses on my question about moving my oil filter
on the '76 440 build in my '63 Fury yet? Surely
someone can help me?

The problem is (of course) the K member must be
totally soaked in oil inside and out to remove
filter...and one must be VERY careful to get the
shortest filter around (and then ding in the bottom
just a little) to avoid conflict with the power
steering belt...which is only a problem if you have
installed a non a/c crank pulley (2 belt from 426
block) when building the engine instead of the 3 belt
one...which of course then requires modification of
the stock steering pump bracket , etc.,.etc....ad
nauseum. 
  I am contemplateing the remote location
kits...rubber hoses and such...good idea or not...?
who's kit....coolers, etc.

Bob Fortson


 
____________________________________________________________________________________
Looking for earth-friendly autos? 
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
http://autos.yahoo.com/green_center/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.