I don't know how concerned you are with originality George, but I bought one off Ebay a couple years ago that was from a 65 Fury 4-spd car and someone had just drilled an extra set of holes in it for the mounts. Unless you look under the car you'd never know, it works fine. I suppose 65 C body 4-spds are harder to find than 64 B bodies though. george smith wrote: > > for a correct 64 4 speed transmission crossmember. I > had my a/t one modified but would like to get a > correct one before I put it together. > Thanks for any help. > > George > > > > > ____________________________________________________________________________________ > > No need to miss a message. Get email on-the-go > with Yahoo! Mail for Mobile. Get started. > http://mobile.yahoo.com/mail Jeff Adams 64 Polara ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.