RE: Heater

[ledman_70@xxxxxxxxxxx]

Thanks Bill. Before I order, since I'm at work and can't check, are 64 
Polara's open/pull and close/push...anyone know? Thanks

Bill Maurits wrote:
> 
> http://www.bouchillonperformance.com
> 
> Bill M
> 65 Coronet 500 'vert
> 
> On 3/5/07, ledman_70@xxxxxxxxxxx <ledman_70@xxxxxxxxxxx> wrote:
> >
> > I LIKE the sound of that Dan! I coughed at the $125 from JCauto, too. Do
> > you have a url for Bouchillon? Thanks
> >
> > mcwheels@xxxxxxxxxxxx wrote:
> > >
> > > Jeff I just took a look at that auction and it appears to me that heater
> > >
> > > control valve has been modified. Actually it looks like the same thing I
> > >
> > > did to mine. After spending a hundred something bucks for a new core I
> > > didn't feel like laying out the $125 plus $65 core charge that JC Auto
> > > wanted for a rebuilt valve. (my valve was so bad I don't think it could
> > > even be rebuilt) The previous owner had already run a new cable from the
> > >
> > > heat control lever to an inline valve under the hood but since the
> > > original valve was still leaking he had the heater disconnected. I
> > > gutted the original valve and soldered over the hole in the top. (it
> > > appears to me that this is what's been done to the one on the auction)
> > > The only other thing was that the heat control lever worked backwards
> > > but I found out that Bouchillon Performance sells an inline valve that
> > > works in the opposite direction (pull to close and push to open) for 26
> > > bucks. They actually told me that had these backward valves made for
> > > just this purpose. Now the control lever works as it should but the
> > > actual working control valve is now under the hood.
> > >
> > > Dan
> > >
> > >
> > >
> > > ledman_70@xxxxxxxxxxx wrote:
> > > >
> > > > Hey guys, I just saw a 64 Belvedere heater box on Ebay and the water
> > > > control valve is different than the one in my 64 Polara. Mine has some
> > > > type of heat control spring that screws into the side of the box that
> > > > controls a valve on the top of the copper tubes...this plunger is what
> > > > is leaking on mine. I would think they would be the same control on both
> > > >
> > > >
> > > > non A/C cars. Am I wrong? I could probably fix mine if it didn't have
> > > > the extra controls. Ebay item #220088521226. Anybody have any input to
> > > > this?
> > > >
> > > > Jeff Adams
> > > > 64 Polara
> >
> >
> >
> > Jeff Adams
> > 64 Polara
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune the 
> > content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.