RE: Oil pan that works!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Oil pan that works!



I'm sorry I have no pictures, and it's in the car now.  But that link 
you posted has another link attached, and it says this 971 pan was used 
on 1973-1978 B-bodies.  Scroll down on the first link, George Smith has 
the proper Mopar part number listed, however I think there is also an 
"AB" on the end, but that is minor.  Even with a windage tray, two 
gaskets and sealer, I've got close to an inch of clearance between the 
pan and the steering center link.  Again, it fits like it was designed 
for it.  Have no fear!


Mike O wrote:
> 
> Got any photos of this pan? If I'm thinking of the same pan, that is the 
> 
> one the Milodon and some other aftermarket deep-sump pans are based on. 
> Still doesn't quite fit in my '65 Coronet (sits on the drag link


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.