
Re: rear end
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: rear end
- From: Terry Dyke <twdyke@xxxxxxxx>
- Date: Wed, 20 Dec 2006 08:01:49 -0800
Don are you saying that the 741 pot from the 66 non tapered axle will fit
the 64 tapered axle!! Also the new street axles with the Green bearings will
replace the tapered axles in my rearend?? I have to admit I am a real
amatuer when it comes to these problems so I really appreciate your
knowledge on this subject. I thank all who have replyed to my post. Terry
----- Original Message -----
From: "Don Dulmage" <big-d@xxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, December 20, 2006 6:58 AM
Subject: rear end
What possible benifit or upgrade would you get from that. I guess I just
dont understand the worry. Your diff already takes a 741 pot and posi with
no trouble. if you want to get rid of the tapered axles for some reason
(they wont break by the way. i know cause i have tried!) get Moser or Bear
or MW to make you a set of Street axles with the so called green bearings
(non tapered self centering) and you are done , forever!
i run the stock 63 tapered axles a 741 diff with a cone type posi in my 63
MW 426. I have a 3800 converter and 3:91 gears with 30.5 inch tall tires
and i pound the living daylights out of it everytime i go for a drive
(when the wife isnt along ;>) since the year 2000. Been good so far.
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://stores.ebay.ca/Don-Dulmage-Enterprises
http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx
.
http://www/?p=
Back to the Home of the Forward Look Network