RE: or books and B series 426

[ntolerance <ntolerance@xxxxxxxxxxx>]

Don, 

Do you have contact info for the shop that does the 383 crank 
welding????

Thanks, Doc.



Don Dulmage wrote:
> 
> 
> This week my publisher went bankrupt. They expanded too fast and then he 
> got the big C and didnt have the strength to fight on. That means the 
> end for my OR book (andmy other boook as well) . i have a few left so if 
> any want them the list guys come first. I will see how many  have left. 
> DVDs will still be available .
> 
> Re the 426 project where we made a 426 from a 400. Gary sold the 400 
> cheapie (but it wasnt cheap :.)
> and we started running the new 426. First pass was a 7.0 in 1/8 and in 
> hours it was running 6.70s. At Grand Bend he ran a 10.64 and at Cicero 
> (aka Slipero) he ran some 6.60s which I believe is under the 10.60 mark 
> comparativley speaking despite spinning a bit on launch. .We are very 
> pleased with the results and I am looking forward to doing a street 
> version if I ever find another used 383 crank to use as a core.  I would 
> like to try it in my 63 while i update the 426MW
> Don
> Author of
> Return to Deutschland (True Adventure)
> Old Reliable (Mopar)
> http://stores.ebay.ca/Don-Dulmage-Enterprises
> http://seniordragster.bravehost.com/index.html
> [Non-text portions of this message have been removed]
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@