Nope Dennis C. wrote: > > Just a thought, did you run the test with the throttle fully open? > > Dennis C. > > Paul Lennemann wrote: > > > > I ran a compresssion test on the 318 that I salvaged out my parts car. > > As I said a few days ago I was told it was running when parked 2+ years > > ago. I shot a little oil into each of the cylinders and ran my test. > > The results were sad. #1=50, #3=30, #5=30, #7=30, #2=35, #4=5, #6=20, > > #8=0. When I pulled the plugs none were heavily coated with carbon or > > exceptionally black and sooty. They looked to me to be pretty typical > > for an engine of that vintage w/70K+ miles on it. This is a solid > > lifter engine, right? Which would eliminate lifters that had bled down. > > > > > > Could it be some stuck valves, or am I in denial? > > > > Paul L. > > > > Plyguy > > '63 Sport Fury > > 440/727 > > http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html Plyguy '63 Sport Fury 440/727 http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx bSONJP. Or send an email to: 1962to1965mopars-unsubscribe@