RE: Dynamic Torque Converter
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Dynamic Torque Converter



I've been told that the best place to put the sending unit is in the 
pump outlet (front) line to the cooler. That will give you the highest 
temps.

Bob H
63 Fury

Brian Safford wrote:
> 
> I have an external cooler and a deep pan as well.
> 
> Where might one hook up a trans temp gauge?
> 
> Brian
> 62 Dart


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.