kickdown linkage
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

kickdown linkage




When the throttle is wide iopen the kickdown linkage must be all the way back. Have a friend floor the pedal (Engine not running please) make sure the kick down linkage is as far back as it will go as well. If not , adjust it so it is. Everything works after that  since it is in the throttle linkage natural geometry. . If the linkage can not  be made to go all the way back the trans will not kickdown on our cars because they dont have part throttle kickdown like the later ones had. Try it , you ll like it
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://stores.ebay.ca/Don-Dulmage-Enterprises
http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.