Dynamic Converter Slippage.Re: Dooner , read my reply again you missed somethin

[Don <dgallimore@xxxxxxxxxx>]

It's a 4.10 Dana and 29.5 tires.

I just ran the spreadsheet on this combo - 5.3% slippage.  That's not 
anything special, is it?  I'd guess I expected less - like 3% or so.

    Akron Don

Gary Pavlovich wrote:
> Akron Don,
> What is your rear gear ratio and tire height?
> Gary Pavlovich
> ----- Original Message ----- From: "Don" <dgallimore@xxxxxxxxxx>
> To: <1962to1965mopars@>
> Sent: Friday, October 13, 2006 2:44 PM
> Subject: Re: Dooner , read my reply again you missed something. That 
> other site will jus
>
>
> > I put a Dynamic 9 1/2 in my car this year.  First time with an 
> > automatic. I think it slips very little through the traps (5400 
> > rpm/4.1/29.5 tires). Did the drive real slow in third and nail it.  
> > Flashed to 4400 RPM.  It seems to drive well but it seems a little 
> > slushy at the start.  Does a valve body make this kind of difference?
> > I'm happy with the converter and really happy with the automatic over 
> > that parts breaking and bitch to launch 4 speed.
> >
> >    Akron Don


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@