Re: pinion angle help!!!!!!

[Dodger7998@xxxxxxx]

No what I am saying is that the front of the  spring, starting point (no 
weight on springs) will be the same point as  when fully loaded (full weight of 
car on springs), the pinion angle will change  as weight is applied to the 
springs, as they get longer when compressed, causing  the rear of the rear end to 
raise, causing the front to go  downward

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@