Re: pinion angle help!!!!!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pinion angle help!!!!!!




Not sure of the exact travel, but the axle will raise up about  5-6 inches 
when weight is put on it, with all the movement being at the rear, as  the front 
is pinned and cannot change this movement will bring down the front of  the 
pinion, and should come out considerably closer to the correct  angle
                                dodger

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.