RE: ... adjustment and timing.

[Sean B <polecat2@xxxxxxxx>]

Schuyler, are you using cast aluminum valve covers?  If so, they need 
good baffles to stop this problem.  Learned this from Don D., I believe.

Sean


Schuyler Wrobel wrote:
> 
if run at higher then 3000RPM for a
> long duration. say at 3500, on the HWY, full load, averaging 85MPH,
> oil well start coming out the breathers, dip stick tube and anywhere
> else it can find a way


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@