Re: need part
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: need part
- From: Don Hudson <mopar4me@xxxxxxxxxxx>
- Date: Tue, 22 Nov 2005 12:20:11 -0500
[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaedmqbOyW3Na/PC PowerScan
-------------------------------------------------------------------
----- Original Message -----
From: <BSchleic57@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, November 22, 2005 10:05 AM
Subject: Re: need part
> Bob, I have a 63 Fury convertible, that part you need I believe, is an
aluminum extrusion that screws to the rear seat back rest. It has a groove
in it that a hard plastic strip on the boot locks into. BTW I have a 67
Satellite convertible as well that may use the same system. That might
increase the number of possible sources.
You might also check on A Body converts. My 65 Dart and Valiant converts
both have an aluminuum strip with the groove in it for the boot.
Don
[AD removed for archives]
-------------------------------------------------------------------
Do you need to borrow money, up to $1500? YES! Payday can help
you with your needs. Get the cash you need now, click the
following link:
caaedmbbOyW3Nf/YESPayday
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
bOyW3N.
Back to the Home of the Forward Look Network