RE: Fine tuning

[ledman_70@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
New Apple® iPod® nano. As Thin as a No. 2 Pencil. Stores up to 3 
Days of Songs! Get it Here FREE*!
caad0PFbOyW3Na/Superb Rewards 
-------------------------------------------------------------------

Aw,c'mon Don....a mechanic once told me if you had torches and a welder 
you could put anything anywhere. Had several guys tell me 8 years ago a 
smallblock Chevy would'nt fit in an Astro, but I put a 305 in my wife's 
Astro in place of the 4.3, nothing had to be cut, I was even able to 
hook to the stock down pipes. I saw a 65 Dart on Ebay a few weeks ago 
with a 440 in it, looked good. The only thing I noticed out of the 
ordinary was the master cylinder turned at an angle for celarance. So, 
stuff that 392 in that A-body and have something nobody else does!
Jeff
Don Hudson wrote:
> 
> "snip"
>  However, I have a 426 block all machined with new bearings and plugs 
> waiting to go together this winter, so I'm just limping the 413 by till 
> then. Of course, once the 426 is in, I will have to rebuild the 413 and 
> find 
> another car to put it in, won't I??? Then there's the 2 OTHER 413's 
> sitting 
> in the corner. hmmm..... ha ha
> Jeff
> 
> Sounds like my problem too.  Have a completely rebuilt 392 Hemi looking 
> for 
> a project and a 72 440 waiting for a rebuild.  65 A Bodies just won't 
> work 
> for either of those motors
> Don 
> 



Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadVJEbOyW3Nf/PC PowerScan
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.