Re: six pak cam

[Joeydahook9@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now! 
No Credit Checks, Easy & Fast Approval 
Cash in you account Overnight!
caadVJ4bOyW3Na/911PaydayAdvance
-------------------------------------------------------------------


Sean - Mother Mopar has two part numbers for the hydraulic cams which  have 
the same specs.  They also call for the same valve spring part  number.
P4452783 - 383-440 Magnum & Super Commando  Cam&Lifters 147.50  @ Moparts
P4529270 - 69-71 440 Six Pak  Cam & Lifters 169.95
 
268/284 degree advertised, 228/241 degree @ .050, 46 degree overlap, 115  
degree centerline,
.450" lift intake, .458" lift exhaust.  Spring: P3690933  Power  level from 0 
- 5800 rpm.
 
 I'm thinking the Six Pak cam is a 3 bolt vs the 1 bolt on the 440  magnum.  
Any Six Pak guys out there that can confirm this?  Joe
 
 

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Nf/Ice Cream Research Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.