RE: Oil Pan/Center Link
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Oil Pan/Center Link



[AD removed for archives]
-------------------------------------------------------------------
Are you a lottery player?Play smarter! Improve your 
odds  and detect winning patterns. Access the best 
kept lottery secret on the Net. Easy to use!
caadVJPbOyW3Na/Lottery Vault 
-------------------------------------------------------------------

I added John's info to the oil pans page.
http://www.1962to1965mopar.ornocar.com/oilpans.html

Thanks John. 

Gary H. 


John wrote:
> 
> 
> I think that everyone knows about oil pan issues for our cars. I 
> purchased a Moroso 20760 pan for my Coronet after being told by Summit 
> that they were reworked to fit 62-65 chassis. The notch at the back of 
> the sump looked like it was going to do the trick. Anyway, after 
> buttoning everything up, I found that the center link barely touched the 
> bottom of the pan. I just finished modifying the center link by taking a 
> piece of 1" mild steel rod, heating and bending the ends to conform to 
> the original, and after prepping both pieces, mig welded the new piece 
> to the bottom of the original. I kept the new piece 1" shorter per sede 
> than the distance between the pitman arm and idler arm holes. After tack 
> welding, I cut out the original piece and finished the welds. Now I have 
> 1" between the pan and center link, no binding, and most importantly, 
> stock steering geometry. I took some photos if anyone is interested.
> -- 
> '65 Coronet 500
> 500 CID Wedge

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Nf/Ice Cream Research Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.