[AD removed for archives] ------------------------------------------------------------------- Get up to $1500.00 Fast and Easy! No Credit Checks! No Paper Hassles! Nothing To Fax! Apply Online and We'll Contact You Within the Hour! caadVJ0bOyW3Na/911PaydayAdvance ------------------------------------------------------------------- Great stuff Don! Question - will the 400 rod 451 rev faster than the longer rod motor? Also, while researching this build and reading Old Reliable, I stayed with the stock rod for two reasons. One, I'm cheap, and two, everything I read said the mopar forged rods were very strong and were adequate for a 6000 rpm motor. Kinda like the pistons. I had the rods magged and resized with Milodon bolts. Hopefully they will be ok. I plan a out of car dyno on the motor this winter with the 2x4 manifold and a Performer rpm. Suggestions on the single 4bbl appreciated. Joe [Non-text portions of this message have been removed] [AD removed for archives] ------------------------------------------------------------------- Erase wrinkles without Botox! Nexiderm SP is clinically proven to reduce wrinkles by 68% Click here to get your 30-day free supply. caadVJZbOyW3Nf/Nexiderm ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. bOyW3N.