ford pistons

[Don Dulmage <big-d@xxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadVJYbOyW3Na/Nexiderm
-------------------------------------------------------------------


have a 482 stroker here of my own made using the Bb ford forged pistons(TRW SEALED POWER FM). 
Still playing with it. 4.4 bore and 3.96 stroke. Block is short poured (1/2 filled) for strength with 080 overbore but still doesnt overheat. 
However i think doing it again i would just oder custom pistons from ross Cp or Je etc. 
Advantage of fords was they were cheap, the right size and could be used with the Nasacar hemi rods when resized sligtly. (102 pins to 103)
When we build an experimental combo we usually do it as cheaply as possible so if it is  not good we dont break our tiny little piggy bank. 
Once we kow it works then we often build a upgraded engine with custom pistons etc)
I have said too much today so i will shut up and go back in my cave for a bit.
Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://stores.ebay.ca/Don-Dulmage-Enterprises
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadVJEbOyW3Nf/PC PowerScan
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.