vacumn gauge questions

[Robert neal zimmerman <northwestweirdo@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadOvZbOyW3Na/Ice Cream Research Survey
-------------------------------------------------------------------

ok guys , gracias for the vac.leak detection advice, i used wd 40 and
found no leaks.
  i am slowly bringing my coronet around one tiny step at a time.
  so i went and bought a vacumn gauge and hooked it up, my little 273
  registered 16. is that an  acceptable reading? its  all stock.
   the needle moves ever so slightly back and forth, is that normal or
   should it be rock steady.??
   i am going to set up the idle mixture on  my rebuilt carb using the
   vacumn gauge method Gary Wilson told me about.
    Just for my  ball park settings on my rebuilt carb it runs so much
    better, that accelerator pump lag is gone and it scoots out pretty
    good. still not running that great at idle circuit levels hope this
    vacumn gauge setting helps.
   BTW  what all can one use a vacumn gauge for, besides just reading
   vacumn? i have heard it can tell u all sorts of stuff. I have never
   owned one in my life before.
   neal Zimmerman, eugene oregon

-- 
http://www.fastmail.fm - Send your email first class

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Nf/PC PowerScan
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.