Re: 1965 Barracuda 4 speed

[don larson <realdeal69dude2003@xxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
caadtaGbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

  Thanks Gary, I'll take it! My address is     60047Bybee rd  California Mo 65018
 
  Thanks a bunch Gary. I'll pay you back for the shipping charges.
 
  Don

"Gary B." <wedge65@xxxxxxxxxxx> wrote:
[AD removed for archives]
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
caadwPbb7LJGya/ProductTestPanel
-------------------------------------------------------------------

The factory weighted the converter and you can too. The Mopar Performance
Chassis book shows how much weight and where to weld it. If you need a
factory weight for a 360, I'm sure I have a extra that I have taken off of
a converter and you are welcome to it. Mother Mopar never weighted the flex
plate as far as I know. B & M did. To use the 360 converter on a 340 steel
crank, just cut the big weight off and you are ready to go.
Gary Bradshaw
Ft. Worth, Texas

----- Original Message ----- 
From: "Robert neal zimmerman" 
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, May 25, 2005 8:56 AM
Subject: Re: 1965 Barracuda 4 speed


[AD removed for archives]
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
caadwPhb7fOBRa/ProductTestPanel
-------------------------------------------------------------------


ok i am willing to eat my words on the balancing info i put out, i
always thought those chunks i have seen on convertors were for this, so
the balance is done in the flexplate???
I am especially intersted in this thread because I have to work the
opposite direction, i have to take a 360 sb 727 & convertor and
make it work with a steel crank 340, so what do i need to find?? Does
B&M have the right flexplate for that??
neal Zimmerman, Eugene oregon

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click
here to get your 30-day free supply.
caadvf5b7fOBRf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- 
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
caadwPhb7LJGyf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


		
---------------------------------
Yahoo! Mail
 Stay connected, organized, and protected. Take the tour
--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
caadwPbbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.