RE: Front light harness routing

[Richard Kinsley <r.kinsley@xxxxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Help us support US Troops ? Just Register Here.
caadtaMbOyW3Na/Permission Data
-------------------------------------------------------------------


Jim Jablonski wrote:
> 
> Folks,
> 
> Could someone look at their front light harness ('64 Fury) and let me 
> know how it routes back to the firewall connector?  I know it goes along 
> 
> the left inner fenderwell, but I am not sure if it runs low near then 
> framerail, or up high over the shock tower.  My new harness has a clip 
> built into it and I need to drill a hole ... obviously I want to get it 
> right the first time.
> 
>--------------------------------------------------------------------

I just removed my harness from the engine compartment last week and the 
drivers side was Near the top of the inner fender below the flat area on 
top. There were holes about every foot with nylon clips to hold it in 
place. This was on a '64 Polara with 318. I gotta imagine it's the same.


Rich Kinsley

[AD removed for archives]
-------------------------------------------------------------------
Save up to 75% on luxury bed & bath! Luxury sheets, duvets,
down comforters, plush towels & more woven from the finest
materials -- 400, 600, 1000 thread count & more from $29.99!
caadt4AbOyW3Nf/SmartBargains
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.