37 degree cone angle / -AN
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

37 degree cone angle / -AN



[AD removed for archives]
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get?
0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to 
2% Cashback Bonus® reward on your purchases & 100% fraud 
protection.
caadtrVbOyW3Na/DiscoverCard
-------------------------------------------------------------------

AN (Army-Navy)sizes were established by the Aerospace industry years ago 
and were designated out-side diameters (O.D.) of the metal tube with 
which each size fitting is used. Each AN size number has its own 
standard thread size. AN and MS (Military Spec.)specify a 37 degree cone 
angle.Industrial hose ends and adapters are designed to JIC (Joint 
Industrial Council) specs with a 45 degree coin angle. The two do not 
mix-be careful.
Hopes this helps.
Bill Jacobs
64 Fury

[AD removed for archives]
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
caadtaJbOyW3Nf/ProductTestPanel 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.