--On 10/26/2024 4:44 PM EDT 'Butch' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:This is a restored heater core for my 64 sport fury. I hooked up an air source at 5lb psi to test it before putting it in the car. I don't actually know what pressure is going through the heater, but figured 5 lbs work work. I Found two leaks. I cleaned and soldered one (see pic; no not a pro but it doesn't leak anymore).The other is a slow leak around the o ring. How have you dealt with this? O ring or some kind of sealant?Thanks / Butch
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/1962to1965mopars/1490f184-b645-4f80-a315-b4be1ba3e0fbn%40googlegroups.com.
Back to the Home of the Forward Look Network