Fwd: Borgeson power steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: Borgeson power steering



Power Steering upgrade advice update....forwarding my email to from Michael Harding whom Gary suggested I contact. 
I just ordered the complete kit from Bergman Auto Craft.
Bill Stevson
1964 Dodge Polara 500 convertible
1965 Plymouth Satellite

---------- Forwarded message ---------
From: Michael <michael@xxxxxxxxxxxxxxxxxx>
Date: Wed, Mar 1, 2023 at 10:37 AM
Subject: RE: Borgeson power steering
To: Bill Stevson <1stevson@xxxxxxxxx>


Hi Bill-
Yes, Borgeson has a great power steering box for the Mopars, and only for the Mopar is it a lighter, smaller box. There are two ways to go about affixing the steering column, as mentioned, and I’ve done the install both ways and prefer the Bergman AutoCraft method… it was well worth it, too. You won’t have that sloppy, ‘cadillac’ one-finger steering, instead, a very firm steering feel with modern internals. The box is brand new, not rebuilt… just resplined and new brackets welded on.

To get your original box out, probably will have to raise the engine to snake that thing out, I think we raised mine a little, too, but can’t remember because it was so long ago. Once it’s out, the new box goes in with plenty of room. I would highly suggest getting Borgeson’s hose kit and fittings, as well. I ran -6 on my plumbing, so I got their custom fittings.

Tell Jeff at Borgeson that I sent you… call him, he’s awesome!

 

Thanks,

-Michael Harding
Freelance Automotive Journalist
Graphic Designer

mascotgraphics.com

 

From: Bill Stevson [mailto:1stevson@xxxxxxxxx]
Sent: Sunday, February 26, 2023 6:19 PM
To: michael@xxxxxxxxxxxxxxxxxx
Subject: Borgeson power steering

 

HI Michael, I am a member of the 1962to1965Mopar mail list clubhouse and it was suggested I get in touch with you to ask about your experience with the Borgeson power steering in your car.  I am getting ready to order the kit from Bergman for my 1964 Dodge Polara .   I read the article you wrote about it and mostly wondering if you still recommend it. Also, wondering if you think I will have to raise my engine to remove the stock power steering box. My engine is a 383 with factory stock exhaust manifolds.

Hope to hear from you, 

Bill Stevson

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CAGzxpVywyxndZkqXkGHUsF7SdyzyKx98Jv_Ds9J-xmeTM3CPiQ%40mail.gmail.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.