[AD removed for archives] ------------------------------------------------------------------- Click here and get your free* stock car racing gift. caac48Qa/PermissionData ------------------------------------------------------------------- There is a 2x4 on Summit, Weiand model 7263 listed for the 331, 354 & 392 early hemi's. Could that be what he meant? MCG states the '57 and '58 poly 318's are different from the '59-'66's, I don't know but would like to know. Tom Duross -----Original Message----- From: Gary Pavlovich [mailto:glpavlovich@xxxxxxx] Sent: Tuesday, January 18, 2005 10:55 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Re: Poly 318 2x4 That is incorrect. I will check out the magazine article for the full context. Gary Pavlovich ----- Original Message ----- From: "Gary H." <62to65mopar@xxxxxxxxxxx> To: <1962to1965mopars@xxxxxxxxxx> Sent: Tuesday, January 18, 2005 5:03 PM Subject: Poly 318 2x4 On page 111 of the newest Mopar Collector's Guide magazine they write: 'The old school first generation Plymouth 318" dual four intake does not fit on an early 1960's Poly head 318.' Is that true? Gary H. [AD removed for archives] ------------------------------------------------------------------- Show your pride with a free* USA T-shirt. Click here to confirm your address. caac2N5f/PermissionData ------------------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. http:///u/?.