From: Dave Walters <whdavid@xxxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: Need 15" Steel Rims?
Date: Sun, 12 Dec 2004 23:20:28 +0000
[AD removed for archives]
-------------------------------------------------------------------
Free recipes to get you in shape
caacVmfbWhUHTa/PermissionData
-------------------------------------------------------------------
I have been told that 65 and older are
> what I am looking for, they would allow for the larger centre hub cap,
> not the
> small.
> Am I making any sense!
> Contact me direct
> Merry Xmas to all the clubhouse members!
>
> Thanks!
> Don Miller
> North Pole
> Canada
>
> --
> [Non-text portions of this message have been removed]
>
Don and group,
The wheels you need to look for are K wheels,pn 92516 made by Budd.They
can be found in 15x5" and 15x5.5" and have the same LARGE center section
as the 14" wheels.If you want to use dog dishes like I have,you'll need
these wheels.They were found on 1/2 ton trucks and SOME C body wagons up
until about '68.Wheels changed to the small center section about this
time.I'll send you some pics of the differences.
You can also have the centers cut out and mounted on new 8" or 10" rims.
Dave Walters
Denver, Co.
[AD removed for archives]
-------------------------------------------------------------------
4 Free Low-Fat recipes
caacVmebWhUHTf/PermissionData
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.