Re: b versus rb block dimensions

[Joeydahook9@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
4 Free Low-Fat recipes
caacVmeb7yoMza/PermissionData
-------------------------------------------------------------------


A B motor to a B Body hood is right at 12", a little less if there is a  hood 
brace over the carb.  I measured from the valley pan, just in front of  the 
intake manifold, with a straightedge across the fenders.  That  dimension may 
be the same for an RB.  The cylinders are taller as well as  the width, but the 
valley pan to hood should be the same.    Joe

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Free Thanksgiving recipes for you
caacVmgb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.