RE: Nervous welder

[Gary Wilson <MOPAR413@xxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get 4 Free low-fat, low-carb recipes
caacHMOb7yoMza/PermissionData
-------------------------------------------------------------------

Magnets work great to hold panels together and you can mover them as you 
weld.



MOPAR413 (Gary) 64 Polora 500





> From: Garry Penn <buildin64@xxxxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: RE: Nervous welder
> Date: Thu,  7 Oct 2004 16:10:59 +0000
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Free recipes to get you in shape
> caacHMVb6eGsBa/PermissionData
> -------------------------------------------------------------------
>
> I have used these clamps with great success, but.........you have to
> have access to remove the part of the clamp that is usually on the
> inside, once your panel is welded up.
> These work great for qtr patches, trunk, etc when you have access from
> both sides.
> Maybe in the cowl area you could 'fish' these pieces out through the J
> nut hole where your fender mounts?
> Garry
>
>
> ntolerance wrote:
> >
> >
> > One last thing, Eastwoods make a butt welding clamp. They sell in a 4
> > pack. Check them out at Eastwoodco.com and see of they will help. They
> > will hold your panel flat with your car and they can also be used to
> > help keep warpage down.
> >
> > Doc.
>
>
>
> Garry Penn
> 64 Belvedere 2dr Sd, WIP (Work in Progress)
> 64 Belvedere 2dr Sd, Parts Car
> 66 Belvedere Wagon (Finally a running car)
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Want to go on a Cruise for Free?
> caacIqOb6eGsBf/PermissionData
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Save money and get healthy
caacHMMb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.