Fw: [318poly] TTI Headers

[Brian Safford <bsafford@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Give your opinion on Abortion and Win!
caacERNb7yoMza/PermissionData
-------------------------------------------------------------------


Well, the drivers side header went on like a charm, but the passenger side
header hits the motor mount with a good half-inch to go before the holes on
the flange line up with the bolt holes.

I plan to call Bill Richardson tomorrow and talk it over with him, but I
thought I'd ask the groups about their own experiences installing these
beautiful headers.

The installation instructions talk about possible interference problems with
the steering linkage, but nothing about motor mount clearance issues.

Any ideas would be welcome.

Regards,
Brian Safford
'62 Dart 440 4-door

[AD removed for archives]
-------------------------------------------------------------------
Do you live vicariously through Reality TV? Let us know and win!
caacDv1b7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.