Re: Brake issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brake issue



[AD removed for archives]
------------------------------------------------------------------
Get a FREE Mortgage Quote from Mortgage War. Simple application 
for mortgage information. If you're ready to get a quote click 
now!
caacneLb7yoMza/411Web
------------------------------------------------------------------


Thanks Ken,
   I did bench bleed the m/c.  What do you make of the fact that it doesn't appear to be pumping fluid with each depression of the brake pedal?  It should spout fluid like a fountain if it's working correctly shouldn't it?
Tim
  ----- Original Message ----- 
  From: Westerlund, Ken 
  To: 1962to1965mopars@xxxxxxxxxx 
  Sent: Thursday, June 24, 2004 12:54 PM
  Subject: RE: Brake issue


  [AD removed for archives]
  ------------------------------------------------------------------
  Get a FREE Mortgage Quote from Mortgage War. Simple application 
  for mortgage information. If you're ready to get a quote click 
  now!
  caacneLb5LXrNa/411Web
  ------------------------------------------------------------------

  Did you adjust the shoes properly??

  If so, then assuming no leaks, and you rebuilt the MC correctly, they
  have NOT been bled.  If they were bled correctly you would be getting a
  firm pedal.  

  Also, you know most of the time you are supposed to bench bleed the MC
  before it's mounted.  

  Regards,
  Ken

  -----Original Message-----
  From: Tim [mailto:ststock23@xxxxxxx] 
  Sent: Thursday, June 24, 2004 12:47 PM
  To: 1962to1965mopars@xxxxxxxxxx
  Subject: Brake issue

  Hey all,
     I've replace all (and I mean all) brake lines, wheel cylinders, and
  rebuilt the master cylinder on my 62 300, but I still get no pedal.
  I've bled them to death, no air, no leaks.  The one thing I notice is
  that when I pump the pedal, only periodically do I get brake fluid
  shooting up from inside the master cylinder.  Am I mistaken but
  shouldn't that be a consistent happening?  It was my first attempt at
  rebuilding a master cylinder but it seemed fairly straight forward.
  Thanks for the help.
  Tim
  [Non-text portions of this message have been removed]

  -----------------------------------------------------------
  Sponsor a child today through Children International.  
  Give a desperately poor child hope for a brighter future.
  For only $18 a month you can make a difference!
  caaciqSb5LXrNf/Children's Int'l
  -----------------------------------------------------------

  ----
  Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

  '62 to '65 Mopar Clubhouse Discussion Guidelines:
  http://www.1962to1965mopar.ornocar.org/mletiq.html. 




[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
caaclxSb7yoMzf/OmahaSteaks
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.