Re: Heater control ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Heater control ?



***********************************************************
NEW Heat-sensitive Hypercolor Thinking Putty from Crazy Aaron comes in grown up handfuls. It's the creativity unleashing, desk toy that changes color when you touch it!
caachWvb7yoMza/ Crazy Aaron's Puttyworld
***********************************************************


I've fixed a couple of these by finding just the right size brass tubing to fit inside the nipples and cutting it just long enuf to match the length from flush inside the switch housing to the tip of the nipple. The brass tubing is available at some hardware stores and most good hobby shops. Cut the piece to length, coat outside of brass tube with JB Weld, insert in porthole on switch body and slide broken plastic nipple back in place over the tubing and wipe off any excess on nipple or smooth surface of inside switch housing and make sure the tube is clear. Let set overnight, put it back together. These switch assemblies are held together by 1/8" plastic rivets. I cut the heads off with an exacto knife then drill them out and tap holes and replace with minature allen head screws from hobby shop. Then you have a service-able switch that can be easily dis-assembled.


From: Thomas R Hansen <trandco1@xxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx, 1962to1965mopars@xxxxxxxxxx
Subject: Re: Heater control ?
Date: Mon, 31 May 2004 09:46:33 -0500

===========================================================
Graduate in less than 13 months with AIU?s Online virtual
campus. Classrooms and student service as close as your
computer. Highly accredited, study anytime ? anywhere.
caaccM2bV7tWJa/ AIU
===========================================================





> Hello All,
>                I have a problem, while removing vacuum lines from
> back of heater control switch I broke connections off switch. Does
> anyone repo this switch ? Or is there a good way to fix this ? All
> the  switches I've come a cross are broke this same way.  Thanks,
> Perry  1965 Satellite 2 Dr. Hdtp.

===========================================================
Graduate in less than 13 months with AIU?s Online virtual campus. Classrooms and student service as close as your computer. Highly accredited, study anytime ? anywhere.
caaccM2b7yoMzf/ AIU
===========================================================




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.