Re: Profuse Poly Parlance Please

[Dave Casey <dcasey@xxxxxxxxxxxxx>]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab8K4b7yoMza/ Val Rad
===========================================================
Another thing that would be nice to know is what kind of deck height to
expect on a poly (deck height being the distance from the crank centerline
to the top of the bores). Since all the poly (277/301/313/318/326) blocks
are the same, I would think it would be in a book somewhere. Anyone know
what the limits are for poly deck height (how much can you shave off the
intake side of the heads before they're gone)?

Dave Casey

===========================================================
$6.95 .com Domain Name Sale! 
Limited Time! ICANN Accredited GoDaddy! 
caab8Lhb7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.